The Advanced Output is available on both Avenue and Arena. If you are using DMX controlled lights, you can choose which fixtures you need to send to.īasically, the Advanced Output is where the magic happens. When using LED processors, you can scale and resize your output to exactly fit the needs of the processor. If you are doing a projection mapping show, you will use the Advanced Output to align your projected content to the physical object you are projecting on. This way you can send VJ content to the main area, while displaying a single line-up still on the monitors in the hall. And you choose how to use them by setting up which parts of your composition are sent to which output. Using the Advanced Output, you can choose which outputs you want to use. If you are spanning your output over several projectors, or using a mix of different outputs like LED screens, projector and pixel strips, Resolume provides a flexible way to control them all at the same time. You can use physical outputs like a DVI cable connected to a projector, a HDMI cable to a LED screen, a capture card like a Blackmagic Intensity, a DMX signal sent to a pixel strip, or even virtual outputs like Syphon or Spout. Should you have any questions regarding this, feel free to contact.Using Resolume's Advanced Output, you can manage all sorts of outputs. Ensure that the Art-Net IP addresses on both the devices are in the same range.Ensure that grandMA2 is running a session.I believe you will have to restart the software once the DMX mapping is finished. Once you’ve assigned the channels, go to Mapping in the main menu and click on Stop. Here’s a snapshot of how I’ve assigned my DMX Channels for a simple output. Once you click on “ Edit Composition DMX Map“, most of the components on the screen turns red to let you assign DMX Channels into those components. In the main menu, go to Mapping > Edit Composition DMX Map. You must find something that says “ ArtNet Input for Lumiverse 1”Ĭhannel offset: 0 (Not sure what this one is do let me know if this is of any prominent use) In the main menu, go to Arena > Preferences > “ DMX” tab. Universe: 0 (This is the Art-Net Universe and should be same as Resolume) Subnet: 0 (Should be same as Resolume settings) LocalStart: 11 (Because I patched the dimmers to Universe 11)Īmount: 1 (It is the number of Universes you want to output) In the Art-Net tab, turn on the Art-Net Output Active. Go to Setup > “ Network” tab > Network Protocols. You will need an MA hardwar e, at least an onPC node to activate parameters. NOTE: The onPC software itself does not come with any license of parameters. The post assumes you know the basic network connections on Windows computers.(eg.: changing IP addresses)Ĭonnect the grandMA2 console and the laptop running Resolume Arena 5 using an ethernet cable that is at least Cat5e or above. I’ve put most of the settings in written format for the sake of those who suffer from bad internet connections. I am using a very basic setup and a simple showfile. So, pardon my bad terminology and typical understanding of the software. Just so we’re clear, I have no clue how to use Resolume.Īll I know about Resolume is that it accepts Art-Net input. A good friend of mine, Vicky, has helped me write this post by contributing thoughts from his years and years of experience in Lighting and working with Visual artists for Live concerts and festivals.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |